Test Documentation Templates
I) Test Policy (Company Level Document)
1) Test Definition
(Verification & Validation)
2) Testing Process
(Proper planning before starts testing)
3) Testing Standards
4) Testing Measurements
(QAM, TTM, PCM)
8) Revision History
II) Test Strategy (Company Level Document)
Table of Contents
3.0 Scope of the Document
4.0 Test Approach
4.2 Functional and Usability Issues
5.0 Phases of Testing
5.1 Documentation Review
5.2 Unit /Module and Integration Testing
5.3 System Testing
5.4 Pre – Production Testing
6.0 Test Management
6.1 Test Procedures
6.2 Test Report
6.3 Test Phase Acceptance
7.0 Risks and Assumptions
7.4 Related Documents
8.0 Revision History
III) Business Requirements Specification
Table of Contents
1.7 Users of the product
2.0 Functional Requirements
3.0 Usability Requirements
3.4 Look and Feel
4.0 Performence Requirements
5.0 Security Requirements
5.2 Authorization and Authentication
6.0 Revision History
IV) Software Requirements Specification
Table of Contents
1.2 Scope of the project
2.0 System Requirements Specification
3.0 Functional Requirements Specification
3.1 Use Cases
3.2 Functional Requirements – Online Catalog
3.3 Functional Requirements – Administration
4.0 Non Functional Requirements
4.1 Usability Requirements
4.2 Performance Requirements
4.3 Compatibility Requirements
4.3.1 Operating Systems
4.4 Security Requirements
5.0 Revision History
V) System Test Plan
1) Test Plan ID:
Some type of unique company generated number to identify this test plan.
Describe the purpose of the Plan, possibly identifying the level of the plan (System Test Plan etc.). This is essentially the executive summary part of the plan.
3) Test Items:
These are things you intend to test within the scope of this test plan.
List all documents that support this test plan. Refer to the actual version/release number of the document as stored in the configuration management system.
5) Features to be Tested:
This is a listing of what is to be tested from the Users viewpoint of what the system does. This is not a technical description of the software, but a Users view of the functions.
6) Features not to be tested:
This is a listing of what is NOT to be tested from both the Users viewpoint of what the system does and a configuration management/version control view. This is not a technical description of the software, but a Users view of the functions.
7) Test Approach:
This is your overall test strategy for this test plan; it should be appropriate to the level of the plan (master, acceptance, etc.) and should be in agreement with all higher and lower levels of plans. Overall rules and processes should be identified.
8) Entry Criteria:
It describes when to start Testing
9) Exit Criteria:
It describes when to stop testing
10) Suspension Criteria:
It describes when to stop testing temporarily.
11) Roles & Responsibilities
Team Lead or Test Lead and Team members Roles and Responsibilities.
Schedule for all Test activities in this Software Test Process.
Training on the application/system (Domain Training)
Training for any test tools to be used.
14) Test Environment / Lab:
It describes Require Hardware and software for setting-up Test Environment or Test Lab.
15) Test Deliverables:
Lists out that what is to be delivered as part of this plan?
Who can approve the process as complete and allow the project to proceed to the next level.
Define terms and acronyms used in the document, it can be used to understood the terms used in this plan.
VI) Requirements Traceability Matrix
1) Serial No
2) Type of Requirement
3) Requirement Source
4) Requirement ID
5) Requirement Description
6) Test Case ID
7) Test Case Description
8) Test Log
9) Defect ID
10) Defect Description
11) Requirement Status
12) Software Version
VII) Test Scenario
1) Scenario ID
2) Scenario Description
3) Module Name/ID
4) Version Control
5) Requirement/s Reference
VIII) Test Case
1) Test Case Id: a Unique name/number (Alfa-numeric)
2) Test Case Name: Name of Test Case
3) Test Suite ID: Unique name/number (Alfa-numeric)
4) Pre-Condition: Status before Test Case Execution
5) Steps: Steps for Executing the Test Case
6) Post-Condition: Status After Test Case Execution
7) Expected Result: Expected Result as per Requirements
8) Actual Results: <After Test Case Execution>
9) Test Results: <After Test Case Execution and After Comparison of Expected with Actual Results> Pass / Fail
10) Remarks: Comments (Optional)
Note 1: You prepare this Test Case Template in Excel Sheet
Note 2: Test Case Template may vary from one company from another and one project to another.
Note 3: In the above template Actual Results and Test Results fields can be filled in Test Execution phase, Remaining fields in Test Design phase.
IX) Test Data
X) Test Metrics
XI) Defect Report
1) Defect Id: any unique name for Identifying the Defect (Alfa numeric)
2) Defect Description: Details about the Defect
3) Test Case Id: Corresponding Test Case Id for tracking
4) Tester: Tester’s name (who found the Defect)
5) Product Version: Version of the Product on which defect was found
6) Build Version: Version of the Build on which defect was found
7) Priority: Importance of the Defect based on Business /Customer
8) Severity: Importance of the Defect based on Functionality
9) Status: Status of Defect
10) Reproducible or not: Yes / No
If not Reproducible:
11) Reporting to: Corresponding Developer
12) Remarks : Comments (Optional)
XII) Test Summary Report
2) Test Items:
3) Reference documents
4) Target Audience
5) Test Summary
5.1) Test Suite Information:
• Number of test suites planned.
• Number and percentage of test suites implemented.
• Number and percentage of test suites executed.
5.2) Test Case Information:
• Number of test cases planned.
• Number and percentage of test cases implemented.
• Number and percentage of test cases executed.
• Number and percentage of test cases passed.
• Number and percentage of test cases failed (total and by severity).
5.3) Defect Report Information
Number of defects found in comprehensive Testing
Number of Test Cases selected for Regression Testing Cycle1
Number of defects found in Regression Testing Cycle1
Number of Test Cases selected for Regression Testing Cycle 2
Number of defects found in Regression Testing Cycle 2
Number of Test Cases selected for Regression Testing Cycle 3
Number of defects found in Regression Testing Cycle 3
Number of Test Cases selected for Final Regression.
Number of opened defects in this release.